If you own a pair of Merei cutters, you will more than likely know how to clean pruning shears. The quality of the shears you own is going to influence how easily they can be cleaned. While it is possible to find shears made from metal, the steel ones tend to be more resistant to corrosion. Stainless steel is also non-magnetic and tends to be stronger too.
When it comes to cleaning, you should always start at the end of the blade, working your way towards the handle. If you have a straight edge, it will be easier to see where the blade stops at. However, if the shears are curved, you will need to look for the groove where the tooth meets the blade. You can use either a toothbrush or a narrow pointed object in this area to clean it.
If the shears are blunt and you have a wire cutter, you can wrap it around the steel blade to clean it. You then simply cut strips of wire to fit along the length of the blade. You should then weld the strip ends together before soldering them to the shear. This will help prevent rust from setting into the steel. Once the well is dry, you can then polish the shear.
For those Merei shears, there are two different kinds of cleaning. The first is called buffing. In this process, you use a soft, lint-free cloth to gently wipe down the shears. You may need to do some wipes down the blades after you do this step. Make sure you use a soft cloth that does not scratch the metal when you do this step.
If your Merei blades are already razor sharp, you will need to give them a good shave before you clean them. To do this, simply grab your scissor and quickly swipe your scissor across the blades. Make sure the blade is very sharp so that it cuts easily. If your blades are still razor sharp, you do not have to give them a full shave.
There are other ways of how to clean pruning shears. One method is to use a cleaner made specifically for stainless steel blades. These cleaners come in liquid or powder form and should be applied on the blades using a soft cloth. To ensure it is completely safe, you should rinse the blades first before you start working with them. Once the cleaner has been applied and it has been rinsed off, you can then wipe it onto the shear itself.
When learning how to clean pruning shears, another important factor to consider is how often you plan to sharpen the blades. If you plan to use the shears infrequently, you can get by with only sharpening the blades once a month. However, if you plan to use the shears regularly, and you are a busy person, sharpening the blades as well as washing them is essential to prevent dulling.
One tip to keep the blades clean when learning how to clean pruning shears is to give the shears a once over after each use. Do not leave the shears laying around in your yard unattended. Put them in a protective bag in your garage or basement. This is especially important if the shears are extremely sharp. Inspect them once a month to make sure they are not damaged. If they are, bring them in to your attention and get them fixed right away.
The first thing to check when learning how to clean pruning shears is the blade, if it is dull or damaged in some way, it will need to be replaced. Dull blades cannot be used for cutting and will perform poorly. Dull blades also will not be able to perform the same cuts that a sharp blade would do. Before attempting to replace the blade, be sure to try it out on a small branch to ensure that it works correctly. If it does not work out right, purchase another blade.
Once the blades are properly cleaned and if you are satisfied with the performance of your shears, it is time to start sharpening them. If you are unsure how to clean pruning shears, practice with the blades on a section of the branch that is hard to reach. It is also a good idea to practice on a branch that has different sizes of leaves to test how sharp the blades need to be.
While your blades are being sharpened, it is a good idea to store them in a cool dry place so that they do not get too warm while cleaning. If your blades become too hot while cleaning them, the pruning shears may be damaged. If you are constantly left with damp pruning shears, the blades will not function properly. This can easily be avoided by purchasing quality blades.